Glass works7 min read

Shower glass partitions in the UAE: frameless or framed, hinged or sliding, and what decides the price

Walk in screens, hinged doors, sliding doors and bath screens in toughened glass: how to choose, what thickness you need, why we measure after tiling, and what moves the price.

A shower glass partition is a panel or an enclosure of toughened safety glass that keeps the water inside the shower: a fixed walk in screen, a hinged glass door or a sliding door, framed in aluminium or frameless. Framed is the budget route and seals most easily; frameless uses thicker glass for a clean, all glass look. Either way the glass must be toughened, and it has to be measured after the tiling is finished, because that is where most leaking showers go wrong. We template, cut and edge shower glass in our Fujairah workshop and fit it across the UAE with our own team.

Bathroom with green marble tiles and a frameless glass shower
Ask about this shower

Which type of shower glass partition do you need?

The shape of the bathroom usually decides it.

TypeHow it worksBest for
Walk in screenOne or two fixed glass panels and an open entry, with no doorLarger bathrooms; the easiest shower to keep clean
Hinged glass doorA glass door on hinges, usually beside a fixed panelMost villa bathrooms, where there is room for the door to swing out
Sliding shower doorGlass panels that glide on a railSmaller bathrooms where a door cannot swing
Bath screenA fixed glass panel on the edge of the bathtubBathrooms where the shower is over the bath

All four are cut to the opening we measure, which is why most of the shower glass we fit is made to a custom size.

Frameless or framed shower glass: what actually differs?

Frameless is not simply better; it is a different set of trade offs.

FeatureFramedFrameless
GlassToughened, typically 8 to 10 mmToughened, typically 10 to 12 mm
LookGlass held in slim aluminium profilesAll glass, with minimal hinges, clamps or channels
Sealing and door alignmentEasier, because the frame does the workDepends on precise templating and hardware
PriceThe budget routeHigher: thicker glass and heavier hardware

Frameless needs the thicker glass precisely because there is no frame doing structural work. If you want the frameless look on a tighter budget, a fixed walk in screen with no door keeps the hardware to a minimum.

Grey bathroom with a frameless walk in shower and dark vanity
Ask about this shower

Why must shower glass be toughened?

Because a shower is a safety critical place for glass. Toughened (tempered) glass is much stronger than ordinary glass, and if it does break it crumbles into small blunt granules instead of sharp shards. Ordinary annealed glass is not acceptable in a shower. Toughened glass carries a safety mark in the corner, so you can check what has been fitted.

Why do we measure after tiling?

Most leaking showers are measuring failures, not glass failures. Walls are rarely perfectly plumb and tiled corners are rarely square, so glass cut to a drawing will not seal against the room as built. We template once the tiling is finished, cut and edge the glass to the real opening, and drill the hinge positions to suit. It adds a visit, and it removes the leak.

What decides the price of a shower glass partition?

Shower glass is measured and priced per opening, so the quotation follows your bathroom, not a catalogue size. What moves it:

  • Size and number of panels: more glass costs more
  • Thickness: frameless glass at 10 to 12 mm costs more than framed glass at 8 to 10 mm
  • Framed or frameless: frameless hardware costs more than aluminium profiles
  • Door type: a fixed screen needs the least hardware; hinged and sliding doors add hinges or rails, a handle and seals

The itemised quotation arrives within 24 hours of the free site visit, with the glass, the hardware and the installation each on their own line.

How long does a shower glass partition take?

Typically 1 to 2 weeks from templating to installation, depending on the glass and the hardware. Templating happens once the tiling is finished, and the committed dates go into the quotation.

Can you fit shower glass in an existing bathroom?

Yes. We template the screen to the walls and floor as they are, so it seals even where they are not perfectly straight. We also replace broken toughened panels in existing showers and reglaze old aluminium frames.

Bathroom with a double oak vanity, LED mirrors and a glass shower
Ask about this shower

How do you keep shower glass clear?

Wipe the glass with a squeegee after each shower so the drops do not dry into marks, and clean it with a mild, non abrasive cleaner; scouring pads scratch the surface and make marks stick faster. Check the seal along the bottom of a hinged door from time to time, because that is where a slow leak usually starts.

Where do we fit shower glass?

Across the UAE: in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Umm Al Quwain and Fujairah. On the east coast, where our workshop is, we template and fit shower glass across Fujairah City, Dibba Al Fujairah, Masafi and Mirbah, in the east coast towns of Kalba and Khorfakkan, and in Hatta, so the measuring visit is quick to arrange.

What should you send for a quote?

  • A photo of the shower area, and whether the tiling is finished
  • The rough width and height of the opening
  • The type you have in mind: walk in screen, hinged door, sliding door or bath screen
  • Framed or frameless, if you already know
  • Your area and emirate
Free site visit within 48 hours.

We template after tiling and send an itemised quotation within 24 hours of the visit. No charge, no obligation.

Book a free site visit

See our glass works service and the glass works guide for partitions and balustrades. Changing the bathroom door as well? Browse door design ideas.

Frequently asked questions

What thickness of glass is used for a shower partition?

Toughened glass, typically 8 to 10 mm for framed enclosures and 10 to 12 mm for frameless ones, because a frameless panel has no frame doing structural work.

Is frameless or framed shower glass better?

Neither is simply better. Framed glass seals and aligns more easily and costs less; frameless gives a cleaner, all glass look but needs thicker glass and heavier hardware, so it costs more.

What glass is required for a shower in the UAE?

Toughened (tempered) safety glass, which crumbles into blunt granules instead of shards if it breaks. Ordinary annealed glass is not acceptable in a shower.

How much does a shower glass partition cost?

It is measured and priced per opening: the size, the thickness, framed or frameless, and the door hardware decide it. A framed enclosure is the budget route and frameless sits higher. The itemised quotation follows within 24 hours of the free site visit.

How long does a shower glass partition take?

Typically 1 to 2 weeks from templating to installation, depending on the glass and the hardware. We template once the tiling is finished.

Can you replace a broken shower glass panel?

Yes. We replace broken toughened panels in existing showers and reglaze old aluminium frames, as well as supplying complete new enclosures.

Do you install shower glass in Kalba, Khorfakkan, Dibba and Hatta?

Yes. We fit shower glass in the east coast towns of Kalba and Khorfakkan, all over Fujairah including Dibba Al Fujairah, Masafi and Mirbah, in Hatta, and across all seven emirates.