A good door design starts with where the door goes: a main door has to look right from the street and stand up to sun and coastal air, a bedroom door has to close quietly, and a bathroom door has to live with water. Every door on this page is one we have made or supplied and fitted for a client in the UAE, from carved double doors for villa entrances to WPC doors for bathrooms. If one is close to what you want, tap "Ask about this door" under the photo: it opens WhatsApp with the photo number, so we know exactly which one you mean.
Jump to: main doors, double and carved doors, doors with glass, wooden doors, room doors, bathroom doors, sliding and terrace doors, which material where.

Main door design ideas
For a villa entrance we usually make the main door in cast aluminium or steel, powder coated. It gives the entrance presence, locks securely and stands up to sun and coastal air, and cast aluminium will not rust and holds fine ornamental detail. Solid wood suits a sheltered entrance, because timber that takes direct sun and rain needs refinishing from time to time.
A pivot door for a modern entrance
A pivot door turns on a pivot point instead of side hinges, so one wide, tall leaf opens smoothly. Fluted panels and a slim strip of glass, like the door at the top of this page, stop a large door looking flat.
Wood look without the upkeep
A woodgrain powder coat gives an aluminium door the warmth of timber with none of the swelling or refinishing. Glass side panels either side of the door bring daylight into the entrance hall.

Black with gold lines
A plain black door with thin gold lines set into it reads modern from the street and suits a light stone or rendered facade. Diagonal lines, diamonds and long vertical strips all work; the trick is keeping to one pattern.

Long pull handles
A pull handle that runs most of the door's height is the simplest way to make a plain door look made for the house. In gold on a black door, it becomes the whole design.

Double door and carved door ideas
A main double door suits a wide villa entrance, and carving is where it gets its character. We measure arched openings on site once the arch is finished, so the doors and the frame follow the arch as built.
A carved double door in an arched entrance
Deep brown with gold detailing gives a traditional Arabic entrance a door that matches its arch and its scale.

Geometric carving with a wood look
Geometric panels in a wood effect finish give the look of a heavy timber door, in aluminium that shrugs off the weather.

A white carved double door
White carving reads crisp against a darker stone surround, and the pattern shows in the shadows of the relief.

Black and gold motifs
One floral or geometric motif across both leaves of a black double door, picked out in gold, makes the entrance the centre of the facade.

Door designs with glass
Glass in a door brings daylight into the hall, and laminated glass adds security and cuts noise.
Stained glass panels
Coloured glass in the upper panels of a double door throws colour into the entrance hall when the sun is on it, while the lower panels stay solid.

Patterned glass in arched doors
A geometric pattern over the glass of arched black doors gives privacy and shade in the spirit of a mashrabiya, and still lets the light through.

Vertical glass strips
Narrow vertical strips of glass in a dark double door, with a fine gold trim, let light in without opening the hall to view.

A glass fanlight above the door
An arched glass fanlight above a solid double door lights a tall entrance and keeps the doors themselves secure.

Wooden door design ideas
Solid wood main and interior doors come from our own carpentry workshop: carved, panelled, flush or sliding, and made to the opening we measure. Wood is at its best indoors or under a deep porch.
Carved solid wood double doors
A dark carved wooden double door is the classic statement door for a majlis or a large hall.

Raised panel mahogany
Raised panels in mahogany give a double door depth and shadow without carving, and suit a classic interior.

Walnut with glass inserts
Glass inserts in a walnut double door let light pass between a hall and a living room while the door still reads as timber.

Refinish rather than replace
A worn wooden door can often be sanded and refinished instead of replaced, when the timber underneath is sound.

Room and bedroom door design ideas
For bedrooms we use WPC or solid wood: the finish is what you see every day, and a solid door keeps the room quiet. WPC takes paint, laminate and woodgrain finishes, so it can match the rest of the joinery in the house.
Flush doors in oak veneer
Flush doors in oak veneer are calm and modern, and the grain carries the design.

Horizontal teak planks
Horizontal planks make a door look wider and suit a warm, natural interior.

Diagonal grooves
Grooves cut on the diagonal give a plain WPC door a pattern without adding a colour, and look sharp in grey or brown.

Classic white panelled doors
White panelled doors suit almost any interior, and they are the easiest to match when you add rooms later.

Taller frames for higher ceilings
A frame that runs above the usual door height, in the same wood effect as the door, makes the ceiling feel higher.

Bathroom door design ideas
Bathroom doors should be WPC. It does not absorb water, so it does not swell, warp or rot in UAE humidity; it wipes clean, and it gives termites nothing to eat. In new UAE villas it has largely replaced solid timber in wet areas.

Colour and inlays work as well on a bathroom door as on a bedroom door: a walnut effect with a single black line matches darker joinery.

Sliding and terrace door ideas
A sliding door on a wall track
A wooden door that slides on a track across the wall saves the space a hinged door needs to swing, which helps in a narrow corridor or a small room.

Arched French doors to a terrace
For a terrace or a garden, hinged French doors in black aluminium with glazing bars give a classic look, and double glazing keeps the heat out. Aluminium also comes in sliding, bifold and pivot systems: see aluminium door systems explained.

Which material for which door?
| Door | What we usually suggest | Why |
|---|---|---|
| Main entrance | Cast aluminium or steel, powder coated | Security, presence and durability in sun and coastal air |
| Sheltered entrance or majlis | Solid wood | Carving and depth; timber in direct sun and rain needs refinishing |
| Bedrooms | WPC or solid wood | Finish quality and a quiet room |
| Bathrooms, kitchen and utility | WPC | Waterproof, no swelling, termite resistant |
| Balcony and terrace | Aluminium or uPVC, glazed | Daylight, insulation and weather sealing |
How do we turn a photo into your door?
- Send the photo you like, or its number on this page, on WhatsApp with the opening size and the room.
- Free site visit within 48 hours to measure the opening as built, arches included.
- Itemised quotation within 24 hours of the visit: door, frame, architraves, handle, lock and hinges each on their own line, plus installation.
- Made or supplied to your sizes: solid wood doors in our carpentry workshop, aluminium and steel doors fabricated and powder coated in our metal workshop, WPC doors supplied to the sizes we measure.
- Installed by our own team, with the frame and the swing agreed before production.
Where do we make and fit doors?
Across the UAE: in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Umm Al Quwain and Fujairah. On the east coast, where our workshop is in the Al Hail Industrial Area, Fujairah, we measure and fit across Fujairah City, Dibba Al Fujairah, Masafi and Mirbah, in the east coast towns of Kalba and Khorfakkan, and in Hatta.
Send the photo number and the opening size on WhatsApp for a first estimate. The itemised quotation follows a free site visit within 48 hours.
See our uPVC and WPC doors service, our carpentry work for solid wood doors, and metal gate designs to match the gate to the door.
Comparing door quotes? Read what a cheaper gate or door quote often leaves out.
Frequently asked questions
Which material is best for a main door in the UAE?
Cast aluminium or steel, powder coated, for most villa entrances: they lock securely, give the entrance presence and stand up to sun and coastal air, and cast aluminium will not rust. Solid wood suits a sheltered entrance, because timber in direct sun and rain needs refinishing from time to time.
Which door is best for a bathroom?
WPC. It does not absorb water, so it does not swell, warp or rot in UAE humidity; it wipes clean, and it gives termites nothing to eat.
Can you make a door like one of these photos?
Yes. Send the photo or its number on WhatsApp with the opening size and the room, and we tell you how close we can get in wood, WPC or aluminium, and what it would cost.
Do you make doors in custom sizes?
Yes. Doors are made to the opening we measure on site, in standard or custom sizes, with the frame and the swing agreed before production. Arched openings are measured once the arch is finished.
How much does a new door cost?
WPC room doors start from AED 1,000 for the standard specification. Main doors, carved doors and wooden doors are priced from the measured opening, the material and the design. The quotation lists the door, frame, architraves, handle, lock and hinges each on its own line, plus installation.
Do you supply fire rated doors?
Yes, with certification. Send us the door schedule from your drawings and we confirm what we can supply before we quote.
Do you fit doors in Kalba, Khorfakkan, Dibba and Hatta?
Yes. We work in the east coast towns of Kalba and Khorfakkan, all over Fujairah including Dibba Al Fujairah, Masafi and Mirbah, in Hatta, and across all seven emirates. The site visit is free and takes place within 48 hours.



