Custom gates are the work Al Taher is best known for in Fujairah, and they have been made in the same Al Hail Industrial Area workshop since 1984. Cast aluminium and steel villa gates, sliding and swing systems, pedestrian side doors, and full automation — designed to your elevation, fabricated in-house, powder-coated on our own line, and installed by our team. Free site visit within 48 hours; itemised quote within 24 hours.
How we work
- Free site visit within 48 hours. We measure the actual opening or structure — no guessing from photographs.
- Itemised quotation within 24 hours of that visit. Materials, finish, hardware and installation priced line by line.
- Fabrication in our own Fujairah workshop. Metal, aluminium, glass, joinery and powder coating in-house — no subcontracting.
- Installation by our own team, with committed dates written into the quotation.
Cast aluminium or steel — which gate suits Fujairah?
The coast usually decides it. Cast aluminium does not rust, which matters within reach of salt air, and it takes intricate ornamental patterns well. Steel is stronger and better suited to very wide spans, heavy-duty security and modern laser-cut panel designs — and with proper powder coating it performs well here too. We fabricate both, and in practice the choice comes down to design, span and budget rather than dogma. Gate design guide →
What gate types do we make?
| Gate type | Best for | Notes |
|---|---|---|
| Sliding gates | Wide driveways, limited swing space | Track or cantilever, manual or automated |
| Swing gates | Classic villa entrances | Single or double leaf, ornamental or minimal |
| Automatic gates | Convenience and security | Motor, remote, safety sensors and access control |
| Pedestrian side doors | Matching entry beside the main gate | Same finish and pattern as the driveway gate |
| Boundary railings & fencing | Perimeter to match the gate | Powder-coated steel or aluminium, matching design |
How long does a gate take?
Typically 2–3 weeks from design approval to installation, depending on size, pattern complexity and finish. Automation adds a little. Because fabrication and powder coating both happen in our own workshop, your gate is not waiting in a third-party queue — which is usually where gate timelines slip.
Why does the finish matter more than the metal?
A gate lives outdoors, fully exposed, often within a few kilometres of the sea. In Fujairah that means the coating is the component under attack — and a gate that was painted rather than properly powder-coated will show it within two or three summers. We powder-coat in-house precisely because it is the step where outsourced gate work most often fails. Powder coating vs painting →
Where do we install gates in Fujairah?
Across the emirate — with 25+ recorded projects in Kalba, 18+ in Mohammed Bin Zayed City and 14+ in Farfar, plus work in Al Hail, Al Faseel, Sakamkam, Dibba, Khor Fakkan, Masafi, Qidfa, Mirbah, Al Bidiyah and Merashid. Read the full Fujairah gate guide →
Which villa gate style suits your entrance?
Different villas need different gate formats, and the driveway usually decides before taste does.
- Sliding gates — the practical choice where driveway depth is limited, or where a clean automated opening path matters. Cantilever versions remove the floor track entirely, which matters where wind-blown sand would foul it.
- Swing gates — usually selected for wider frontages and more traditional villa elevations, where there is room to swing inward without eating the parking bay.
- Pedestrian side doors — built to match the main gate so the front boundary reads as one design rather than two purchases.
- Materials — cast aluminium, mild steel, stainless steel and wrought iron, chosen on look, maintenance and site exposure.
Cast aluminium is our most requested material for Fujairah villas because it will not rust in coastal humidity and never needs repainting — lower upkeep and a finish that holds its appearance instead of becoming a recurring job. Mild steel suits heavier custom profiles and solid privacy-focused designs; stainless steel fits cleaner contemporary homes; wrought iron remains the strongest option for decorative patterns and classic entrances.
How should gate automation be planned?
As part of the gate design, not bolted on afterwards. We supply and fit gate automation, and for powered gates in the UAE the relevant framework includes UAE.S IEC 60335-2-103 for gate, door and window drives, UAE.S EN 12453 for safety in use of power-operated doors and gates, and UAE.S EN 12978 for safety devices on power-operated doors and gates.
Most clients want automation for convenience, privacy and smoother vehicle access — particularly on villas with frequent arrivals, deliveries or family movement through the day. Deciding early means gate type, clearances, motor arrangement and user flow are aligned from the start rather than compromised later. Weight is the practical constraint: a cast aluminium leaf is roughly 65% lighter than steel at the same size, which reduces load on the motor and extends its service life — and that matters most on wide sliding gates.
Who is this service for?
This suits projects needing a custom gate rather than a stock panel adapted on site — both replacements on existing villas and new builds where the gate must match the elevation, boundary wall and driveway layout:
- A replacement gate — when the current one is rusting, difficult to operate, or no longer suits the facade.
- A new custom entrance — built to exact width, height, privacy level and style.
- An automated access setup — where sliding or swing automation is planned with the gate itself.
- A coordinated exterior package — where the gate should match a side door, railing, pergola or other fabricated elements.
We also work with contractors and developers wanting one fabrication partner for villa metalwork across Fujairah and the wider UAE. In-house production and installation mean fewer handovers between vendors, which removes the confusion that creeps in between measurement, manufacturing, finishing and site fitting. Our fabrication division →
Itemised quotation within 24 hours of the visit — no charge, no obligation.
For the full range, materials and technical specifications UAE-wide, see our metal gates service page.
Matching outdoor structures? Aluminium pergolas in Fujairah →
Frequently Asked Questions
How much does a custom gate cost in Fujairah?
It depends on span, material, pattern complexity, finish and whether automation is included — which is why we quote from an actual site measurement rather than a price list. The quotation is itemised so you can see exactly what each element costs, and you get it within 24 hours of the visit.
Can you automate an existing gate?
Often yes. We assess the existing gate's weight, frame condition and hinge or track arrangement during the site visit, then advise whether automation can be retrofitted safely or whether the structure needs strengthening first.
Do you make matching boundary railings and fencing?
Yes — and matching the gate is the usual request. The same pattern, profile and powder-coat colour run through the gate, side door and perimeter railings so the whole boundary reads as one piece of work.
Will a steel gate rust in Fujairah?
Not if it is finished correctly. Bare or painted steel will corrode in coastal air; properly prepared and powder-coated steel holds up well. If rust resistance is the overriding concern, cast aluminium removes the risk entirely.
How long does a gate take from order to installation?
Typically 2–3 weeks after design approval, depending on size and finish. The committed dates go into your quotation before work starts.
What is the difference between a sliding and a swing villa gate?
A swing gate needs clear space to open inward and suits deeper driveways and wider frontages. A sliding gate travels along the boundary wall and needs no swing space, which makes it the answer for short driveways, sloped ground and very wide openings. Cantilever sliding systems remove the floor track entirely where sand would foul it.
Which material is best for a villa gate in Fujairah?
Cast aluminium for most coastal villas — it does not rust, holds ornamental detail well and never needs repainting. Steel where you need very wide unsupported spans or higher security, prepared and powder coated to match the exposure. Both perform well; the finish decides lifespan more than the metal does.